Text
OPTIMASI PRODUKSI HASIL PERENCANAAN SUCKER ROD PUMP TERPASANG PADA SUMUR X LAPANGAN Y
Sumur yang terus berproduksi akan mengalami penurunan tekanan reservoir dan akibatnya produktifitas sumur menurun, maka perlu ditambah tekanan agar fluida dapat mengalir ke permukaan, yaitu melalui metode pengangkatan buatan (artificial lift). Sumur X menggunakan Sucker Rod Pump sebagai metode pengangkatan buatan dalam memproduksikan minyak. Data pada bulan Maret 2016 menunjukkan bahwa efisiensi volumetris sumur tersebut masih dibawah 70% sehingga perlu dilakukan peningkatan efisiensi volumetris diatas 70%. Saat ini sumur X memproduksikan 400 barrel fluida per hari. Produksi maksimum sumur X ini adalah 827 BPD yang artinya sumur X hanya memproduksikan 46% dari AOF. Berdasarkan kemampuan berproduksi sumur, sumur X belum mencapai produksi optimum sebesar 496 BPD. Untuk menghasilkan produksi optimum sebesar 496 BPD tersebut didapatkan nilai stroke length 120 inchi dan kecepatan pompa 11.5 SPM.rnrnWells in production will decline as a result of reservoir pressure and well productivity decline, then it should be added that the pressure of the fluid can flow to the surface, through artificial lift method (artificial lift). X well is using Sucker Rod Pump as a artificial lift method to producted oil. On March, 2014, Well Data showed that volumetric efficiency in X well is below 70% so it needs to optimize the volumetric efficiency more than 70%. The current fluid production of Well X is 400 BPD or 46% of AOF and the average production around Well X is 827 BPD. Based on the well production ability, X well has not gained optimum production. X well should gain around 496 BPD. To gain optimum production in X well, the value of stroke lenght should be size 120 inch and rate of pump 11.5 SPM.,
Tidak tersedia versi lain